METCLEAN 40 PLUS

DESCRIPTION & BENEFITS

METCLEAN 40 PLUS is a super strengthen and concentrated phosphoric acid-based cleaner used for the removal of hard water, calcium, lime, concrete and mill scale. METCLEAN 40 PLUS is ideal for rust removal and phosphating steel surfaces prior to painting.

METCLEAN 40 PLUS is also recommended for spray and wipe operation in ablution areas for the removal of calcium, hard water, scale, soap scum, build up on urinals, sinks, shower stalls and bathroom fittings.

1. Rust remover prior to painting in marine and industrial applications.
2. Descaling of appliances
3. Pipe pickling

METHOD OF USE

RUST REMOVAL

1. Clean surface of excess rust deposits by wire brushing or chipping.
2. Dilute METCLEAN 40 PLUS with upto 8 parts water, apply to surfaces to be cleaned.
3. Allow painted surfaces to dry and a smooth grey finish indicates all rust has been converted to a passive phosphate film suitable for application of paint.
4. When dipping components, immersion time is dependent on the degree of rust but with METCLEAN 40 PLUS when used in concentrated form immersion times between 30 and 60 minutes should be sufficient to convert all rust to a passive phosphate film.
5. Do not rinse component with fresh water otherwise the passive film will be destroyed and rust will form.

DESCALING OF URNS, JUGS AND KETTLES

1. Dilute METCLEAN 40 PLUS with up to 8 parts water.
2. Bring the appliance to the boil.
3. Empty and thoroughly rinse with water.

PIPE PICKLING

1. Dilute METCLEAN 40 PLUS with water 4:1.
2. Circulate solution through pipework or allow to soak overnight.
3. Drain and allow to dry.
4. Do not wash treated surfaces with water as rust will form.

Warning

METCLEAN 40 PLUS is an acidic product. Avoid skin and eye contact when handling.

First Aid

If poisoning occurs contact a doctor of poisons information centre. PH 13 11 26. If swallowed do not induce vomiting, give milk or water and seek medical advice. If skin contact does occur remove contaminated clothing and wash thoroughly with water. For eye contact, irrigate with water for 15 minutes and if irritation persists seek medical advice.

• Water based, quick break biodegradable degreaser.
• Leaves a completely non- greasy surface.
• Low flash point – ideal for underground use.
• Powerful cleaner and degreaser for stubborn oil,
  grease and other stains on concrete surfaces.
• pH Neutral and Non Flammable.